Christie S2 Projectors - Programming auto power cycle

Christie Series II Projector - Programming projector to auto power cycle

These instructions apply to creating the auto power cycle ONLY if the projector is using the Christie IMB-S2.  If you are using a third party IMB, follow the manufacturer's instructions for proper shutdown.
    • Related Articles

    • Christie - Temporary Suspension of your theatre Recommendations

      The following recommendations have been provided by Christie for preparing and maintaining your projection booth for an extended shutdown. While theatres are currently suspended from operation, there are a few recommendations we suggest you take to ...
    • Lamp Installation Christie Solaria One - Solaria One + - CP2210 - CP-2215

      Here is a link to a video provided by Christie Digital that illustrates the lamp changing procedure for Solaria One/Solaria One Plus projectors. Christie Digital video for the Solaria One/One Plus
    • Christie IMB S2 Menu Missing Options

      When logged into the TPC (touch panel control) with advanced credentials (ADMIN or SERVICE) as opposed to USER level authorization, the menu only presents the USER level menu options. Normal Christie IMB options when logged in as ADMIN or SERVICE ...
    • IMB Server not responding

      This is a very common call that we receive.  The call is that the (IMB) server is not responding to input from the web GUI.  This is a common complaint from servers that use a web browser (Chrome, Firefox, Opera, Internet Explorer or Edge) for ...
    • Picture flickering slowly on screen (Christie IMB)

      A complaint was received that the picture was flickering on the screen, much like a film projector running slowly.  The image did not jump abruptly between frames but rather appeared as a smooth, albeit slow, continuous motion. A review of the IMB ...