Filmvault Exhibitor Self-Installation Instructions-2Bay-QNAP

Exhibitor Self-Installation Instructions-2Bay-QNAP

Self-Installation Instructions


  1. Unbox server and inspect for any damage during shipping.
  2. On the back of the server are three network ports (see below image for reference).  The top left port connects to your ‘media’ network.  This will be the network where the TMS or screen server pulls the content via an FTP connection.  The bottom left port connects to the Internet network.  The “Internet/Wan Network” port is configured per the information we received in the site survey form that you submitted. The “Media/Content Network” port is configured per the information in the site survey after the DNOC connects to it remotely.
  3. Connect the power cable.  Press the power button on the front panel to power-on the server (See image below).
  4. Send an email to EDeliveryTechOps@bydeluxe.com after the server is powered on and we will check status from our side.  If everything looks good we will send you a piece of test content and if you can ingest that we will consider your site operational for e-delivery.




Front                            Rear

A close up of a deviceDescription automatically generated            The back of a computerDescription automatically generated