Dimmer will not respond to commands - JNIOR controller.
When logging into the JNIOR controller, the following was noted:
The relays that control the house and stage lights are latched. Until they are manually unlatched this will prevent the dimmer from operating normally.
Whomever manually pulsed the JNIOR to shut down the lights for the night did a single, not a double tap. This caused the relay to close but not reopen. Effectively it has been holding the relay closed since last night.
While this is not an immediate issue, if done regularly it will cause the relay in the dimmer to fail prematurely.
Related Articles
Touch Panel Controller (TCP) appears dead. Projector is on but cannot be controlled via TPC or net
Christie xenon cinema projectors have three separate power supplies; the lamp power supply (LPS), the low voltage power supply (LVPS) and the standby supply. The standby supply provides power to the touch panel controller (TPC) and the network ...Christie Touch Panel Controller displays Windows XP desktop
The touch panel controller (TPC) on Christie Series II projectors runs on a Windows XP Embedded operating system. The older, Series I projectors ran under a Windows CE Embedded operating system. Under normal operation, the operating system is ...Barco Series 2 Projectors will now be provided with ICP-D Instead of TI ICP - InfoT1501
Barco service bulletin Serial Number : 1501 Date : 2021-01-26 Product : All Digital cinema series 2 Models Priority Code* : D ”Must” modification, Barco will provide the necessary components to perform this modification at no charge. ...InfoT1501 Series 2 projector will now be provided with Barco ICP-D instead of TI ICP
Barco service bulletin Serial Number : 1501 Date : 2021-01-26 Product : All Digital cinema series 2 Models Priority Code* : D ”Must” modification, Barco will provide the necessary components to perform this modification at no charge. Improves the ...Christie Replacing the TPC (Touch Panel Controller) Battery
The linked document covers procedures for changing the battery in the Christie Touch Panel Controller