To be able to VNC into a server, the server must have had the pkg ingested.
This is not done by default in the factory.
- Install pkg: dcp2000_X11vnc-1.10.pkg or for SW 2.6.XX and above VNC v1.10 signed
- Remove pkg: dcp2000_X11vnc-1.10_remove.pkg or for SW 2.6.XX and above VNC v1.10 signed remove
- VNC password: hlnkch
- vncpasswd location: /doremi/etc/vnc/passwd
- VNC port: 5900
- Only one VNC session can be open at any one time.
Ingesting dcp2000_X11vnc-1.9.pkg can be done via USB device or ftp.
To ingest via USB
- Place dcp2000_X11vnc-1.10.pkg only (not the remove pkg) on a USB device
- Plug the USB into the front or back USB port, it will auto mount
- Select the pkg from the list, and select Ingest. (the pkg is transfered to the rc.once dir)
- Reboot the server and the pkg is ingested (at boot the rc.once Dir gets read first, and the pkg ingested)
- The VNC pkg is now ingested.
Ingest via ftp
Using an ftp client (e.g. filezilla http://filezilla-project.org/download.php?type=client )
- Create a connection to your server. Open File/Site Manager
- Host = servers IP address e.g. 192.168.100.50
- Port = (this can be left blank)
- Protocol: ftp (For the ingest andadmin login it must ftp and for Root login it must be sftp)
- Logon type: Normal
- User: admin / root
- password: xxxx / xxxxxx
- Click connection
- The first time you will get a pop up diagloue box to trust this host, tick yes
- Drag dcp2000_X11vnc-1.10.pkg into /doremi/etc/rc.once
- Close the ftp client
- Reboot the server and the pkg is ingested (at boot the rc.once Dir gets read first, and the pkg ingested)
- The VNC pkg is now ingested.
VNC client for your remote device
- Using any VNC client (e.g http://www.realvnc.com/download/viewer/)
- Install the VNC client on the device you want to control your from.
Opening a VNC session
- Open your VNC client, and put the server IP address in the host name area.
- Click connect.
- Your VNC window will open.
- Enter the password: hlnkch <enter>
To change the VNC password.
After ingested the VNC package
And you want to modify the VNC password, you can do this in the terminal window or remotely.
- Open a terminal window Menu/system/Terminal
- Login as SU <enter>
- Type: vncpasswd /doremi/etc/vnc/passwd <enter>
- After running that command, you will be prompted to add a password, and then confirm it.
- Password: (new password)
- Verify: type the same password again