Dolby/Doremi
Dolby/Doremi Server Date reset to 1900's
There is a known bug in the Security Manager software of certain Doremi/Dolby server models. This bug affects DCP-2000, ShowVault, IMS1000 and IMS2000 servers and some of their variants. Dolby refers to this bug as the Y2K24 bug as what it does is ...
Power Switch Location for DCP-2000 and Showvault
A common question that we get asked is "how do I turn on my Doremi Showvault or DCP-2000 series server?" Doremi did an amazing job of hiding the power switch from the user. The short answer is that the power switch is behind the front hinged door ...
Critical Updates to Dolby Servers
This document addresses important deadlines and updates that are required for continued operation of Dolby servers. <- This link brings you to the original Dolby document. It is paraphrased below: Issue 1 These cinema servers have code that prevents ...
Doremi Showvault/DCP-2000 Power Switch Location
The power switch for the Doremi Showvault/DCP-2000 is located inside of the RAID drive bay on the left side.
Doremi DCP-2000/Showvault - Adding VNC into a server
VNC into a server Created on Thursday, 13 December 2012 17:17 To be able to VNC into a server, the server must have had the pkg ingested. This is not done by default in the factory. Install pkg: dcp2000_X11vnc-1.10.pkg or for SW 2.6.XX and ...
Dolby DSS100/DSP100 Manaul
Click on the link below for the Dolby DSS100-DSP100 manual Dolby DSS100-DSP100 Manual
Dolby Digital Cinema Power Maintenance Recommendations v1 1
Dolby Labs has issued a bulletin regarding the long term shutdown of their cinema equipment. The Dolby bulletin is here: Dolby Digital Cinema Power Maintenance Recommendations V1.1
Dolby DSS-200 Power Switch for Hard Reboot
The Dolby DSS digital cinema server was designed deliberately without a front panel power switch. This was done by design to prevent accidental turn-off during a presentation. There are times, however, when a full power cycle is needed to clear a ...
Dolby/Doremi Cinema Server Qualified Hard Drive List
The attached document contains a list of approved/tested replacement hard drives for Dolby/Doremi servers.Dolby/Doremi Approved Drives
Dolby DSS Server not keeping proper time
The Dolby server synchronizes with a NTP server (master time clock) when it boots up. If a server is left on for an extended period the time clock will drift. We suggest a weekly reboot of the server. This will synchronize the clock to the correct ...
Dolby DSS 200 Manual
Here's a link to the Dolby DSS200/DSS220 Manual
Doremi Showvault Server not powering up on reboot
The IMB draws its power from the projector. If the projector is powered off from its main switch, the IMB doesn't get power and the system cannot fully wake up.The IMB is critical to all functions on the server and without it powered you are ...
Dolby/Doremi - How to Test playback
Here's a training video for the Dolby/Doremi digital cinema server on how to test playback.